Menu Bar - Toshiba e-studio 45 Operator's Manual

1
1-9 Starting up and logging in

Menu bar

The menu bar has six menus. When an action is not available in the current context,
the command is dimmed.
Menu: Choose this:
File Preferences
Print Pages
Exit
Job Delete
(For more
information on
Duplicate
these commands,
see page 1-22)
Rename
Hold
RIP and Hold
Print
Print and Hold
Process Next
Remove Raster
Properties
To do this:
Set Command WorkStation preferences; see page 2-4.
Print any or all of the following pages to the GA-1040: Configuration
page (Setting List), PS Test Page, PCL Test Page, Control Panel Map,
PS Font List, PCL Font List, Job Log. You can also print the Setting
List to any printer you specify; see page 2-5.
Log out from the server, exit the Command WorkStation application,
and return to the Windows desktop.
Delete one or more selected jobs.You cannot delete a selected job by
pressing the delete key.
Duplicate one or more selected PostScript or PCL data jobs in the
Spool or Print areas; see page 1-19, page 1-21, and page 1-22.
Rename a selected job.
Hold the selected job(s); see page 1-17.
RIP and then hold the selected job(s); see page 1-17.
Print the selected job(s); see page 1-21.
Print the selected job(s) and then hold it in the RIP area; see
page 1-17.
Give top priority to this job (Spool area only).
Remove the raster information from the selected job(s); see
page 1-23.
View and edit print option settings for the selected job(s) and print
job(s) with new settings; see page 1-39.
N : Job properties for PCL files cannot be modified.
OTE