Setting Gutter Sizes - Toshiba e-studio 45 Operator's Manual

5
5-13 Modifying the layout manually
Vertical gutter size field
Horizontal gutter size field
• To rotate all pages in a certain location on the front side of each duplex sheet, press
the Shift key and click the Rotate icon on any page in that location on any sheet. For
example, in the graphic above, if you press the Shift key and click the Rotate icon on
Page 8, Page 6 would rotate as well because they are both in the same location on the
front side on the sheet.
• To rotate all pages in a certain location on the front and back sides of each duplex
sheet, press the Ctrl key and click the rotate icon on any page in that location on any
sheet. For example, in the graphic above, if you press the Ctrl key and click the
rotate icon on Page 1, Pages 2, 3, and 4 would also rotate because they are in the
same location on the front and back sides of the sheet.

Setting gutter sizes

DocBuilder Pro defines the locations of gutters for you according to the layout and
sheet size governing the imposition of the job. In layout view, you can specify the size
of a gutter by entering a value in its gutter size field and pressing Enter. For example,
perfect-bound jobs typically require larger gutters than saddle stitch ones, in order to
provide room for grinding off the spines and gluing signatures together when the book
is bound.
The size and location of the margin (the area between the outside edge of a
N :
OTE
group of imposed pages and the edge of the sheet) is a function of layout and sheet
settings. You cannot define custom margins.
Margin