Logging In - Toshiba e-studio 45 Operator's Manual

1
1-5 Starting up and logging in

Logging in

When the Command WorkStation has connected to a server, the Log in/out slider
appears, prompting you to select a login level and enter a password. Before you log in,
the Administrator key is in the vertical position, and the Operator and Guest keys are
in the flat (horizontal) position. When you click your login level, the corresponding
key turns to the vertical position.
Log in/out slider
For Administrator or Operator access to the GA-1040, click the corresponding key,
enter the password, and click Log in or press Enter. For Guest access only, click the
Guest key and then click Log in. No password is required for Guest access.
If you change your mind about logging in, or do not have the password you need, click
Cancel.
When you have entered the appropriate password and logged in, the Log in/out slider
retracts and the full Command WorkStation display appears. The color of the key in
the lock indicates your login level. If the GA-1040 is handling a large number of jobs,
it may take a few moments to display the entire job list.
When you reopen the slider after you have logged in, the Log in button will have
changed to the Log out button.