Toshiba e-studio 45 Operator's Manual page 89

3
3-5 Job Management with DocBuilder
Choose this:
Process Next
Remove Raster
Properties
Thumbnail A
Thumbnail B
Impose
Remove Imposition
Download
To do this:
Give top priority to this job.
RIP (and then print) it as soon as the processor
is free, before other waiting jobs.
Option is dimmed if there are no other waiting
jobs.
Remove the raster data from a job that has
raster data (indicated by a raster icon); leave the
PostScript data unaffected.
View, override print option settings, and print a
selected job or a group of selected jobs.
Open a selected held job in the Thumbnail A
window where you can view a full-screen
preview of the job, edit the job, or merge it
with like data from other jobs. In order to
merge jobs, they must be of the same data type
(for example, PostScript jobs cannot be merged
with raster jobs).
Open a selected job in the Thumbnail B
window for viewing a full-screen preview of the
job, or for copying pages into a job in the
Thumbnail A window. In order to merge jobs,
they must be of the same data type (for
example, PostScript jobs cannot be merged
with raster jobs).
Open a selected held PostScript or PDF job in
the Imposition window; for more information,
see Chapter 4.
Remove imposition settings assigned in the
DocBuilder Imposition window; for more
information, see Chapter 4.
Download files and fonts to the GA-1040 with
Fiery Downloader; see page 2-12.
Raster data is:
n/a
N : This command is available only
OTE
for jobs in the Spool area that are not
currently held.
Deleted
N : If you remove raster from a job in
OTE
the RIP area, the job is sent to the Spool
area.
Possibly deleted and regenerated,
depending on whether you change any
settings that require re-RIPping
Changed if job is edited, unaffected if job
is only viewed
Unchanged
Unchanged
Unchanged
n/a