Placing Documents; Placing Documents On The Platen Glass; Placing Documents In The Feeder - Canon 5119B001AA Basic Operation Manual

Placing Documents

This section describes how to place documents on the platen
glass or in the feeder.

Placing Documents on the Platen Glass

1
Open the feeder or the platen glass cover.
2
Place your document face down.
3
Align the document with the appropriate paper
size marks.
If the document does not match any of the paper size marks, align
the center of your document with the arrow mark.
2-4
4
Close the feeder or the platen glass cover gently.
The machine is ready to scan or copy the document.
When scanning or copying is complete, remove the document
from the platen glass.
CAUTION
Precautions when closing the feeder or the platen
glass cover
• Be careful not to get your fingers caught.
This may cause personal injury.
• Do not press down the feeder or the platen glass cover
forcefully. This may damage the platen glass and cause
personal injury.

Placing Documents in the Feeder

1
Spread the document guides a little wider than
the actual document width.
2
Pull out the tray extension before loading the
large size document.
Pull out the tray extension when the document is hanging out of
the document feeder tray.