Muting And Unmuting Video And Audio Outputs - Extron electronics DXP DVI Pro User Manual

2.
3.
4.

Muting and Unmuting Video and Audio Outputs

Individual outputs can be muted or unmuted as follows:
NOTES:
1.
2.
3.
4.
Press and release the Preset button.
Press and release the
Preset button.
The Preset button lights.
PRESET
All input buttons with
assigned presets light.
Figure 50. Enter Recall Preset Mode
Press and release the input or output button for the desired preset.
Press and release the Input 1 button.
The button blinks to indicate that this
preset number is selected but not recalled.
INPUTS
2
1 3 4 5
Figure 51. Select the Preset
Press and release the Enter button. The configuration stored in the selected memory
location is now the current configuration and can be viewed in view-only mode.
Press the Enter button to
recall the preset.
C O N T R O L
ENTER PRESET VIEW ESC
The Enter and Preset
buttons return to unlit or
background illumination.
Figure 52.
Press the Enter button
• Mutes are protected when front panel lock mode 2 is selected. You can view
the status of the output (muted or unmuted) in lock mode 2 but you cannot
change it from the front panel (see
(Executive Modes)" on page 37).
• To enable changes to the mute settings, set the lock mode to 0.
Press the Esc button to clear any input, output, or control buttons that may be lit.
Press and release the View button.
Press the Video and Audio buttons as necessary to select video, audio, or both to
mute or unmute.
One at a time, press and hold the buttons for the desired outputs until the selected
outputs blink to indicate the mute or return to their previous state to indicate the
unmute (approximately 2 seconds).
Preset Assigned
INPUTS
1 2 3 4
No Preset Assigned
C O N T R O L
PRESET
ENTER
The Enter button blinks
6 7 8
to indicate the need to
recall the preset.
INPUTS
1 2
3 4
All input buttons return to unlit or background illumination.
"Locking and Unlocking the Front Panel
DXP DVI Pro and DXP HDMI Series • Operation
5 6 7 8
VIEW ESC
5 6 7 8
34