Adjusting The Position Of The Cloth Presser Lower Plate; Adjusting The Lift Of The Cloth Presser Foot - JUKI MOL-254 Engineer's Manual

3) Adjusting the position of the cloth presser lower plate

Adjust so that the cloth presser foot and the cloth presser lower plate are aligned with each other in
terms of the longitudinal and lateral positions.
At this time, the clearance provided between needles is 57.1 mm.
☆ If it is necessary to additionally machine the cloth plate lower plate blank supplied as accessory to
change the distance between the needles, make sure with special attention of the clearance provided
between the cloth presser foot and the lower plate.

4) Adjusting the lift of the cloth presser foot

Vertical clearance provided between the underside of the cloth presser foot and the top surface of the
throat plate is 22 mm when the cloth presser foot goes up.
Standard Adjustment
22 mm (0.866")
37
− −
Center