3-10. How to adjust the cloth puller
3-10-1. Adjusting the cloth puller belt and its longitudinal position
Cloth puller belt
Throat plate
❹
❷ ❸
Slightly sinks
❶
Feed dog of
the sewing
machine
(largest feed
pitch)
– 12 –
1) Loosen hexagon head setscrews ❶ (three piec-
es).
Maximize the feed amount of the main body of
sewing machine. Adjust the feed amount to 3 to
4 mm by moving the cloth puller back and forth
when the feed dog approaches closest to the belt.
2) Loosen screw ❷ and adjust the longitudinal posi-
tion of the cloth puller so that the head of screw ❷
comes in contact with rubber ❹ to such an extent
that rubber ❹ slightly sinks.
3) Tighten nut ❸ to secure the cloth puller.
❷
SM9051603SC
❸
NM6050003SC
Cloth puller base
❹
binding part
Screw
Nut
Anti-vibration rubber