(5) Adjusting the air speed controller
1) Cam up/down cylinder
1. Adjustment amount of the speed controller on the rod side : Give the adjustment screw four turns
after fully opened.
2. Adjustment amount of the speed controller on the anti-rod side : Give the adjustment screw three
turns after fully opened.
2) Belt presser removing base cylinder
1. Adjustment amount of the speed controller on the rod side : Give the adjustment screw four turns
after fully opened.
2. Adjustment amount of the speed controller on the anti-rod side : Dive the adjustment screw three
turns after fully opened.
3) Belt presser cylinder
1. Adjustment amount of the speed controller on the rod side : Give the adjustment screw two turns
after fully opened.
Standard Adjustment
4 turns
3 turns
20 28
2 turns
30
119
−
−
Speed controller
28
20
3 turns
4 turns