Names And Functions Of Components; Names And Functions Of The Main Unit - JUKI MOL-254 Engineer's Manual

2. NAMES AND FUNCTIONS OF COMPONENTS

[1] Names and functions of the main unit

Temporary stop switch
The switch is used to temporarily stop
the machine operation.
Sewing machine head
The machine head
performs sewing while
making the motor drive
the needles.
Start switch
Start switch used
for starting up the
sewing.
Loop feeding
device
The device feeds
out the loop.
(Optional)
Loop supplying device
Performs a series of loop supplying
procedure.
Clamp feed device
The device is used to
assist in loop feeding.
A type (standard)
ON : Press the
black button.
OFF : Press the red
button.
3
−
Operation box panel <P29>
The panel is used to specify/display/
actuate functions.
(Note) 1. The <P 29> appearing in
Power switch (varies in accordance with destination.)
B type (for high-voltage)
ON : Turn the center grip of the switch clockwise.
OFF : Turn it counterclockwise.
−
Thread stand
The stand is used to
set needle thread
and the thread to be
s u p p l i e d t o t h e
bobbin winder.
DIP switches
Used to select
functions.
Bobbin winder
Used to wind a
bobbin with thread.
Control box
Controls the whole
machine.
the text above indicates
that a detailed explanation
for the relevant component
is given on page(s) 29.