Position Of The Thread Trimming Solenoid - JUKI MOL-254 Engineer's Manual

6) Position of the thread trimming solenoid

① Turn the main shaft to the supporting run section of the thread trimmer cam [refer to
the thread trimmer link stopper screw], move the thread trimming solenoid in the direction of the
arrow mark , and the cam follower moves in the direction of
② At this time, the clearance provided between the roller attaching face of cam follower and the cam
face of thread trimmer cam is 1 mm.
Thread trimmer cam
Standard Adjustment
Thread trimming solenoid
1 mm
Cam follower
21
− −
.
Thread trimming solenoid arm
Adjusting