Roll Paper Margin; Level Structure For Roll Paper Margin Setting - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

1.4.4.8 Roll Paper Margin

Setting this panel allows switching roll paper margin, all sides 3mm / all sides
15mm / top and bottom 15mm, right and left 3mm / top and bottom 25mm, right
and left 3mm. This setting is only valid for roll paper. It's not valid for cut sheet.
This setting changes only margin, and doesn't change image size.

Level structure for roll paper margin setting

PRINTER SETUP
PAPER MARGIN
[<]
[<]
[<]
[<]
If margin=3mm is set
Printing positions of vertical line and horizontal line are same as paper
size.
If margin=15mm, or Top/Bottom15mm is set
Printing positions of vertical line and horizontal line are positions widened
12mm from all sides or top and bottom.
If margin=25mm is set
Printing positions of vertical line and horizontal line are positions widened
22mm from top and bottom. (Refer to Figure 1-10)
Product Description
[< / >]
PAPER MARGIN
DEFAULT
[∧ / ∨]
PAPER MARGIN
T/B15mm
[∧ / ∨]
PAPER MARGIN
T/B25mm
[∧ / ∨]
PAPER MARGIN
15mm
[∧ / ∨]
PAPER MARGIN
3mm
[∧ / ∨]
X
Figure 1-10. Roll Paper Margin (1)
If printable area is more than X=15mm from right edge of paper, the portion is
clipped.
Vertical line is not printed.
X
Figure 1-11. Roll Paper Margin (2)
Operating Panel
Roll Paper Width X
X (*)
Printable Area
X
Cut Position or Border
(Refer to Figure 1-11)
Roll Paper Width X
Clipped Area
X (*)
Printable Area
X
Revision C
Vertical
Line
X
X
52