EPSON Stylus Pro 4400/4450/4800/4880/4880C
1.4.4.19 Nozzle Check Pattern Printing
Selecting this mode allows the user to print the nozzle check pattern, firmware
version, used paper/ink, and maintenance tank counter.
Nozzle checks method in nozzle check pattern print is switched to either auto
or manual by cleaning setting ON/OFF at nozzle check.
When setting is ON:
Perform auto nozzle check pattern printing.
When setting is OFF:
Perform nozzle check pattern printing as usual.
Version
: A<Z><xxxx>
Maintenance Tank : <zzz>%
Cur. Ink Count
: <aaaaa.a>ml Prev.Ink Count :<bbbbb.b>ml C - P:<ccccc.c>ml
Cur. Paper Count : <ddddd.d>cm Prev.Paper Count:<eeeee.e>cm C - P:<fffff.f>cm
Figure 1-13. Nozzle Check Pattern Printing (Stylus Pro 4800)
Version
: A<Z><XXXX>-<y.yy>.IBC
Maintenance Tank : <zzz>%
Cur. Ink Count
: <aaaaa.a>ml Prev.Ink Count :<bbbbb.b>ml C - P:<ccccc.c>ml
Cur. Paper Count : <ddddd.d>cm Prev.Paper Count:<eeeee.e>cm C - P:<fffff.f>cm
Figure 1-14. Nozzle Check Pattern Printing (Stylus Pro 4880/4880C)
Product Description
Order of colors from left
8-color (Stylus Pro 4800):
Photo Black / Matte Black
Light Black
8-color (Stylus Pro 4880/4880C):
Photo Black / Matte Black
→
Light Black
Light Black
4-color (Stylus Pro 4400/4450):
Matte Black 1
Magenta 1
Each parameter indicates the following;
<Z>:
0
<xxxx>:
Firmware version
<y.yy>:
Network Firmware version
(Stylus Pro 4450/4880/4880C only)
I:
Number of colors (four or eight) used for printing
B:
Business system setting
C:
Custom version setting
<zzz>:
Maintenance tank available quantity
<aaaaa.a>: Total ink counter just before print the last nozzle check
pattern (5.1 figures)
<bbbbb.b>: Total ink counter just before print the nozzle check pattern
(5.1 figures)
<ccccc.c>: Value of <aaaaa.a>-<bbbbb.b> (5.1 figures)
<ddddd.d>: Total paper counter just before print the last nozzle check
pattern (5.1 figures)
<eeeee.e>: Total paper counter just before print the nozzle check
pattern (5.1 figures)
<fffff.f>:
Value of <ddddd.d>-<eeeee.e> (5.1 figures)
NOTE: When printing a nozzle check pattern, the printer ignores the top
margin specified from the panel setting it to 20mm to prevent top
margin being rubbed in PGPP AND PSPP.
Operating Panel
→
→
Cyan
Magenta
→
→
→
Light Cyan
Light Magenta
→
→
Cyan
Vivid Magenta
→
→
Light Cyan
Vivid Light Magenta
→
→
→
Matte Black 2
Cyan 1
Cyan 2
→
→
→
Magenta 2
Yellow 1
Yellow 2
Revision C
→
→
Yellow
Light Light Black
→
Yellow
→
Light
→
59