Epson Stylus Pro 4400 Service Manual page 164

EPSON Stylus Pro 4400/4450/4800/4880/4880C
PAPER NEAR END
Item
LCD Panel message PAPER LOW
LED display Paper check LED: Blink
Explanation Occurs when the current remaining paper counter value is
less than the near end setting value while the remaining
paper detection is on with roll paper or cut paper loaded.
Execute one of the following:
• Set the near end setting value so that it is more than the
current remaining paper counter value, using roll or cut
Recovery paper menu of the remaining paper detection in the
printer setting menu.See
(p.48)"
• Reload paper.
CONVERSION CARTRIDGE LIFE NEAR END
Item
LCD Panel message TIMES REMAINING
Ink check LED: On
LED display
Pause LED: On
Explanation The number of usable time of the conversion cartridge is
less than ten.
Recovery Press the [Pause] key.
Troubleshooting
Description
"Remaining paper detection
Description
Troubleshooting Based on Panel Messages
Revision C
164