Initial Ink Charge; Cleaning - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

5.3.19 Initial Ink Charge

Check the amount of ink remaining before starting Initial Ink
C A U T I O N
Charge. If the remaining ink is less than 50%, replace the ink
cartridge with a new one and then start the procedure.
Procedure
1. Turn the printer power on.
2. Start the adjustment program and select [Initial Ink Charge].
3. Press the F5 key and Initial Ink Charge will start.
4. After Initial Ink Charge is completed, click the [Finish] button.
Figure 5-57. Initial Ink Charge
Adjustment

5.3.20 Cleaning

Procedure
1. Turn the printer power on.
2. Start the adjustment program and select [Cleaning].
3. Press F1~F4 key to start cleaning.
Key Cleaning Ink consumption amount
F1 CL1 Approx. 2.7 g/ 8 colors
F2 CL2 Approx. 3.5 g/ 8 colors
F3 CL3 Approx. 7.4 g/ 8 colors
F4 CL4 Approx. 9.25 g/ 8 colors
4. When cleaning is completed, click the [Finish] button.
Basic Adjustment
Processing time
Approx. 1 minute and 10 seconds
Approx. 1 minute and 10 seconds
Approx. 1 minute and 10 seconds
Approx. 3 minutes and 30 seconds
Figure 5-58. Cleaning
Revision C
412