Entire Process Screen - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C
9. Load an A4-sized paper vertically on the paper tray, select "Automatic
Nozzle Check" from the "Types of Nozzle Check" box , and click [Next] to
start the nozzle check.
10. Load an A3-sized paper horizontally on the paper tray and click [Next] to
perform the alignment check.
Clicking the [Skip alignment check] button will let you
C H E C K
proceed to the next step without performing the alignment
P O I N T
check.
11. Check the alignment pattern. If there is any defect, click [Cleaning] to
execute cleaning.
If the check pattern is appropriate, click [Next].
12. Load an A4-sized Archival Matte Paper vertically on the paper tray, and
click [Next] to print the calibration chart.
Never touch the printed calibration chart.
C A U T I O N
Adjustment
Figure 5-62. Entire Process Screen
Basic Adjustment
Revision C
417