Maintenance Tank (Porous Pad Assy., Ink Eject); Maintenance Tank Removal - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

4.2.2.2 Maintenance Tank (Porous Pad Assy., Ink Eject)

Do not touch the IC chip while performing the following
C A U T I O N
steps. Doing so could disrupt normal operation/printing.
1. Insert the fingers of your right hand into the hole of the "Maintenance Tank"
and pull while pressing against the lower part of the ink cartridge storage
box with your right thumb.
2. With attention not to tilt the "Maintenance Tank" in any direction, remove
the "Maintenance Tank" while supporting with your left hand.
Disassembly & Assembly
Maintenance Tank
Disassembly Procedures
Figure 4-8. Maintenance Tank Removal
Revision C
IC Chip
210