Disassembly Procedures - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

4.2 Disassembly Procedures

Because this printer is assembled with precise
C A U T I O N
measurements in 1/100mm units, disassembly of the
frame and defined components is prohibited.
Disassembly/reassembly is limited to parts whose part
numbers are shown in the "Parts List" of Chapter 7.
(Disassembly of parts other than those listed could
result in problems that cannot be repaired except at the
factory.)
Disassembly/reassembly operations for parts/units not
listed in this "Disassembly/Reassembly" section cannot
be performed on-site.
Disassembly & Assembly Disassembly Procedures
Revision C
206