Print Head Slant Adjustment (Cr); Screens Shift For Print Head Slant Adjustment (Cr) - Epson Stylus Pro 4400 Service Manual

EPSON Stylus Pro 4400/4450/4800/4880/4880C

5.3.9 Print Head Slant Adjustment (CR)

Papers Required
Size: 16"
Type: Premium Glossy Photo Paper
Procedure
1. Turn the printer power on.
2. Start up the adjusting program, select [Print Head Slant Adjustment (CR)] and click [Print] to print the adjustment pattern. After the printing is finished, the
Carriage Unit moves to the center of the printer (adjustment position).
3. Click [Next] (Proceed to Screen 2).
Screen 1
Adjustment
To print out the adjustment pattern
Screen 2
Figure 5-35. Screens shift for Print Head Slant Adjustment (CR)
Basic Adjustment
Screen 3
Revision C
Screen 4
End of the
adjustment
The "Carriage Unit" moves
to the home position and
the paper is reeled off.
397