Ricoh C211 Service Manual page 628

2. Master Feed Miss
< Phenomenon>
2-3. The master is not clamped to the drum and the Master Feed Jam indicator blinks.
* The master is cut to a length of 19 cm and remains in the plotter unit.
* The Master Misfeed indicator lights before the drum rotates.
I
< Possible causes>
c Countermeasure>
1. The master buckle sensor is faulty.
1. Change the master buckle sensor.
* When the buckle of the master be-
comes larger than specification (30
mm), the sensor does not turn on
and the Master Feed Jam indicator
lights.
6-6