Ricoh C211 Service Manual page 203

3. REPLACEMENT AND ADJUSTMENT
3.1 CUITER REPLACEMENT
[H]
/
L
[1]
1. Remove the
screws)
2. Remove the
3. Remove the
connector)
4. Remove the
tape dispenser from the main body. (1 connector, 2 nuts or
support bracket [A]. (3 screws)
tape dispenser cover [B] and the upper housing [C] (1 screw, 1
tape dispensing assembly [D]. (2 connectors)
cutter assembly [E], (2 screws) 5, Replace the
NOTE:
Make sure that the cutter moves smoothly by rotating the cam drive
gear [F] clockwise manually after the replacement.
6. Reassemble the tape dispenser.
NOTE:
Make sure that the tape dispenser PCB [G] and the tape dispensing
bracket [H] are in lower housing slots [1].
6-5