Ricoh C211 Service Manual page 196

10.7 DELlVERY BELT/PAPER EXIT SENSORS
REPLACEMENT
[A]
/ \
2.
3.
5.
6.
7.
8.
9.
[G]
Remove the vacuum unit (See page 5-83).
Remove the 2 screws [A] securing the vacuum guide plate.
Remove the tension roller [B] (2 screws),
Remove the bearing [C] (1 E-ring).
Disconnect the first paper exit sensor connector [D].
Remove the delivery belts [E],
Disconnect the semnd paper exit sensor connector [F].
Turn the vacuum guide plate [G] over.
Replace the paper exit sensors [H] (2 screws each).
5-84