Ricoh C211 Service Manual page 107

5. DESIGNATED AREA CHECK MODE: VT2500
The command sheet image (designated area) and the original image can be
printed at the same time to check the designated area and the positioning of the
image within the designated area as follows:
1) Turn off the power switch.
2) Turn on the power switch while pressing the Make-up Key and the Reset
Key,
tiw
1'
3) Press the Make-up Key
4) Press the "8" key ("8" is
Turn on the power switch
while pressing these keys.
([Fn] is displayed in the counter.)
displayed in the counter.)
Clear Mc
E
c
[41516
stop
Master Mak
718[9
~ ECIE
/'
Memory ~laar
Proof Print Start
Press the "8" key=
Class
]0
121C
I EIE
5) Set the command sheet and the original on the original table and press the
Print Start key to make copies.
* If white paper is used as an original, only the command sheet (the line
showing the designate area) is printed.
4-17