Ricoh C211 Service Manual page 759

Tech Service Bulletin No. SS830/950/VT21 30-039
Page 2 of 2
INTERCHANGEABILITY CHART
o
OLD
and
NEW parts can be used in both OLD and NEW parts CAN NOT be used in OLD machines.
NEW machines.
2
OLD parts can be used in OLD and NEW machines.
1
NEW parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines. NEW
OLD parts CAN NOT be used in NEW machines.
3
parts CAN NOT be used in OLD machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/s
previously modified, use the new part numbers individually.
UNITS AFFECTED:
~!VT2130 priports manufactured after Serial NumberC280111 0000 will have the modified pressure spring
link installed during production.