Ricoh C211 Service Manual page 605

7.
Adjusting The Position of The Ink Detecting Pin
J1.(
[A] A?
\
'-
\
\
7ilmm
[B]
—[A]
[cl
—[c]
rnl
k
[UJ
\
'/
Purpose : To ensure the detection of ink built-up between the ink roller and the doctor
roller.
Method : 1.
2.
3.
4.
5.
6.
Remove the drum unit.
Remove the stainless steel screen, tetron screen, and the metal screen from
the drum unit.
Remove the ink around the ink roller [A] and the doctor roller [B].
Make sure that the distance between the end of detecting pin [C] and the
doctor roller surface is 7 ~ 1 mm.
If incorrect, loosen the screw [D] and adjust the distance by moving the
ink detecting pin [C].
After adjustment retighten the screw [D].
5-65