Ricoh C211 Service Manual page 565

z Disassembly>
1. Cutter
1)
2)
3)
4)
5)
[D]
[A]' -
\
[B]
Slide the scanner unit to the left.
Disconnect the 6P connector [A].
Remove the cutter unit [B] (2 screws).
Remove the cutter cover [C] (4 screws).
* When moving the cutter motor,be careful not to damage the cutter.
Remove the cutter [D] (1 nut).
* When reassembling, move the cutter motor to the home position
(operation side end) before the cutter cover is installed.
5-26