Cisco 350XG & 550XG Series 10G Stackable Managed Switches Dashboard
Identification
Identification
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
•
CPU—Percentage of CPU being used.
Each bar becomes red if the resource utilization is higher than 80 percent.
Hovering over a bar displays a tooltip displaying the numeric utilization information
(used resources/max available).
The following configuration options (right-hand corner) are available:
•
Refresh Time—Green if the fan is operational; Red if the fan is faulty.
-
No Refresh—Information is not refreshed.
-
30 seconds —Information is refreshed every 30 seconds.
-
1 minute—Information is refreshed every minute.
•
MAC Address Table—Click to open
•
TCAM Utilization Information—Click to open
•
CPU Utilization Information—Click to open
This module displays basic information regarding the device and stack.:
It displays the following fields:
•
System Description—Displays description of the device.
•
Host Name—Entered in the
can be added in the
Dynamic
System Settings
Getting Started
Wizard.
Addresses.
TCAM
Utilization.
CPU
Utilization.
page or default is used. Also
2
26