General; Qos Properties - Cisco 350XG series Administration Manual

Quality of Service

General

General
STEP 1
STEP 2
STEP 3
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
This section covers the following topics:
•

QoS Properties

• Queue
• CoS/802.1p to a Queue
• DSCP to Queue
• Bandwidth
• Egress Shaping per Queue
• VLAN Ingress Rate Limit
• TCP Congestion Avoidance
QoS Properties
The QoS Properties Page contains fields for setting the QoS mode for the system
(Basic, Advanced, or Disabled, as described in the
addition, the default CoS priority for each interface can be defined.
To select the QoS mode:
Click Quality of Service > General > QoS Properties.
Set the QoS mode. The following options are available:
• Disable—QoS is disabled on the device.
• Basic—QoS is enabled on the device in Basic mode.
• Advanced—QoS is enabled on the device in Advanced mode.
Select Port/LAG and click GO to display/modify all ports/LAGs on the device and
their CoS information.
The following fields are displayed for all ports/LAGs:
• Interface—Type of interface.
"QoS Modes" section). In
26
557