Cisco 350XG series Administration Manual page 92

Administration: File Management
File Operations
STEP 3
STEP 1
STEP 2
STEP 3
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
Global—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
- Link Local Interface—Select the link local interface from the list.
• Server IP Address/Name—Enter the IP address or name of the TFTP
server.
• Destination File Name—Enter the backup file name.
• Sensitive Data Handling—Select how sensitive data should be included in
the backup file. The following options are available:
- Exclude—Do not include sensitive data in the backup.
- Encrypt—Include sensitive data in the backup in its encrypted form.
- Plaintext—Include sensitive data in the backup in its plaintext form.
The available sensitive data options are determined by the current
NOTE
user SSD rules. For details, refer to Secure Sensitive Data Management >
SSD Rules page.
Click Apply to begin the operation.
To backup a system configuration file using SCP:
Click Administration > File Management > File Operations.
Enter the following fields:
• Operation Type—Select Backup.
• Source File Type—Select the type of file to be backed up.
• Copy Method—Select SCP.
See SSH User Authentication
• Remote SSH Server Authentication—To enable SSH server authentication
(it is disabled by default), click Edit, which takes you to the
Authentication
Server Authentication
(password or public/private key), set a username and password on the
device, if the password method is selected, and generate an RSA or DSA
key if required.
for instructions. Then enter the following fields:
page to configure this, and return to this page. Use the
page to select an SSH user authentication method
6
SSH Server
SSH
87