Cisco 350XG series Administration Manual page 32

Configuration Wizards
Getting Started Wizard
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
Cisco 350XG & 550XG Series 10G Stackable Managed Switches, Firmware Release 1.0.0.x
Enter the fields:
• Interface—Select the IP interface for the system.
• IP Interface Source—Select one of the following options:
- DHCP—Select for the device to receive its IP address from a DHCP
server.
- Static—Select to enter the IP address of the device manually.
If you selected Static as the IP address type, enter the following fields:
• IP Address—IP address of the interface.
• Network Mask—IP mask for this address.
• Default Gateway—Enter the default gateway IP address.
• DNS Server—Enter the IP address of the DNS server.
Click Next
Enter the fields:
• Username—Enter a new user name between 0 and 20 characters. UTF-8
characters are not permitted.
• Password—Enter a password (UTF-8 characters are not permitted). If the
password strength and complexity is defined, the user password must
comply with the policy configured in
• Confirm Password—Enter the password again.
• Password Strength—Displays the strength of password. The policy for
password strength and complexity are configured in the
Strength page.
• Keep current username and password—Select to keep current username
and password.
Click Next
Enter the fields:
• Clock Source—Select one of the following:
- Manual Settings—Select to enter the device system time. If this is
selected, enter the Date and Time.
- Default SNTP Servers—Select to use the default SNTP servers.
Password Strength.
Password
3
28