User Accounts - Cisco 350XG series Administration Manual

Administration
Stack Management
STEP 1
STEP 2
Stack Management

User Accounts

NOTE
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
If Auto Detection is selected, the device detects console speed automatically.
When Auto Detection is not enabled, the console port speed is automatically set to
the last speed that was set manually at (115,200 by default).
When Auto Detection is enabled but the console baud-rate has not yet been
discovered, the system uses speed 115,200 for displaying text (for example, the
boot-up information).
After Auto Detection is enabled in the Console Settings page, it can be activated
by connecting the console to the device and pressing the Enter key twice. The
device detects the baud rate automatically.
To enable Auto Detection or to manually set the baud rate of the console:
Click Administration > Console Settings.
Select one of the following options in the Console Port Baud Rate field:
• Auto Detection—The console baud rate is detected automatically.
• Static—Select one of the available speeds.
See Administration: Stack
The User Accounts page enables entering additional users that are permitted to
access to the device (read-only or read-write) or changing the passwords of
existing users.
After adding a level 15 user (as described below), the default user is removed
from the system.
It is not permitted to delete all users. If all users are selected, the Delete button is
disabled.
Management.
5
61