Cisco 350XG series Administration Manual page 165

Administration: Discovery
Configuring CDP
STEP 1
STEP 2
STEP 3
STEP 4
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
- Management Power Level—Displays the supplier's request to the
powered device for its Power Consumption TLV. The device always
displays "No Preference" in this field.
CDP Neighbors Information
The CDP Neighbors Information page displays CDP information received from
neighboring devices.
After timeout (based on the value received from the neighbor Time To Live TLV
during which no CDP PDU was received from a neighbor), the information is
deleted.
To view the CDP neighbors information:
Click Administration > Discovery - CDP > CDP Neighbor Information.
To select a filter, check the Filter checkbox, select a Local interface, and click Go.
The filter is triggered, and Clear Filter is activated.
Click Clear Filter to stop the filter.
The CDP Neighbor Information page contains the following fields for the link
partner (neighbor):
• Device ID—Neighbors device ID.
• System Name—Neighbors system name.
• Local Interface—Number of the local port to which the neighbor is
connected.
• Advertisement Version—CDP protocol version.
• Time to Live (sec)—Time interval (in seconds) after which the information for
this neighbor is deleted.
• Capabilities—Capabilities advertised by neighbor.
• Platform—Information from Platform TLV of neighbor.
• Neighbor Interface—Outgoing interface of the neighbor.
Select a device, and click Details.
9
156