Secure Sensitive Data Management; Ssl Server - Cisco 350XG series Administration Manual

Security

Secure Sensitive Data Management

STEP 4
STEP 5
Secure Sensitive Data Management

SSL Server

Cisco 350XG & 550XG Series 10G Stackable Managed Switches
Use the arrows to move the authentication method between the Optional Methods
column and the Selected Methods column. The first method selected is the first
method that is used.
• RADIUS—User is authorized/authenticated on a RADIUS server. You must
have configured one or more RADIUS servers. For the RADIUS server to
grant access to the web-based configuration utility, the RADIUS server must
return cisco-avpair = shell:priv-lvl=15.
• TACACS+—User authorized/authenticated on the TACACS+ server. You
must have configured one or more TACACS+ servers.
• None—User is allowed to access the device without authorization/
authentication.
• Local—Username and password are checked against the data stored on the
local device. These username and password pairs are defined in the User
Accounts page.
The Local or None authentication method must always be selected
NOTE
last. All authentication methods selected after Local or None are ignored.
Click Apply. The selected authentication methods are associated with the access
method.
See Security: Secure Sensitive Data
This section describes the Secure Socket Layer (SSL) feature.
It covers the following topics:
• SSL Overview
• SSL Server Authentication Settings
Management.
19
410