Cisco 350XG series Administration Manual page 572

Access Control
ACL Binding
STEP 6
NOTE
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
• Select IPv4-Based ACL—Select an IPv4-based ACL to be bound to the
interface.
• Select IPv6-Based ACL—Select an IPv6-based ACL to be bound to the
interface.
• Default Action—Select one of the following options:
- Deny Any—If packet does not match an ACL, it is denied (dropped).
- Permit Any—If packet does not match an ACL, it is permitted
(forwarded).
Default Action can be defined only if IP Source Guard is not activated
NOTE
on the interface.
Click Apply. The ACL binding is modified, and the Running Configuration file is
updated.
If no ACL is selected, the ACL(s) that is previously bound to the interface are
unbound.
25
552