Regular Vlans - Cisco 350XG series Administration Manual

VLAN Management

Regular VLANs

Regular VLANs
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
This section describes the GUI pages used to configure various types of VLANs.
This section describes the following processes:
• VLAN Configuration Workflow
• VLAN Settings
• Interface Settings
• Port to VLAN
• Port VLAN Membership
• GVRP Settings
• MAC-based Groups
• Protocol-based VLANs
VLAN Configuration Workflow
To configure VLANs:
1. Create the required VLANs as described in the
2. Set the desired VLAN-related configuration for ports and enable QinQ on an
interface as described in the
3. Assign interfaces to VLANs as described in the
Port VLAN Membership
4. View the current VLAN port membership for all the interfaces as described in
the Port VLAN Membership
5. If required, configure VLAN groups as described in the
Protocol-based VLANs
6. If required, configure TV VLAN as described in the
VLAN and Customer Port Multicast TV VLAN
Interface Settings
section.
section.
sections.
VLAN Settings section.
section.
Port to VLAN section or the
MAC-based Groups
Access Port Multicast TV
sections.
12
and
230