Dashboard
Identification
Identification
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
Hovering over a bar displays a tooltip displaying the numeric utilization information (used
resources/max available).
The following configuration options (right-hand corner) are available:
•
Refresh Time—Select one of the options displayed.
•
Multicast Groups—Click to open
•
MAC Address Table—Click to open
•
TCAM Utilization Information—Click to open
•
CPU Utilization Information—Click to open
This module displays basic information regarding the device and stack, as shown below:
It displays the following fields:
•
System Description—Displays description of the device.
•
Host Name—Entered in the
added in the
Getting Started
•
Firmware Version—Current firmware version running on device.
•
MAC Address (master unit)—MAC address of the unit.
•
Serial Number (master unit)—Serial number of the unit.
•
System Location—Enter the physical location of the device.
MAC Group Address
Dynamic
Addresses.
TCAM
CPU
System Settings
page or default is used. Also can be
Wizard.
Utilization.
Utilization.
2
24