Cisco 350XG series Administration Manual page 104

Administration: File Management
DHCP Auto Configuration/Image Update
STEP 4
STEP 5
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
• Link Local Interface—Select the link local interface (if IPv6 is used) from the
list.
Enter the following optional information that is used if the DHCP server did not
provide the required information.
• Backup Server IP Address/Name—Enter either the backup server IP
address or name.
• Backup Configuration File Name—Enter the backup configuration file
name.
• Backup Indirect Image File Name—Enter the indirect image file name to be
a file that holds the path to the image.
used. This is
image file name is: indirect-cisco.scp. This file contains the path and name of
the firmware image.
The following fields are displayed:
• Last Auto Configuration/Image Server IP Address—Address of the last
backup server.
• Last Auto Configuration File Name—Name of the last configuration file
name.
Click Apply. The parameters are copied to the Running Configuration file.
6
An example of an indirect
99