Cisco 350XG series Administration Manual page 269

VLAN Management
Access Port Multicast TV VLAN
STEP 1
STEP 2
STEP 3
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
Receiver ports
Security and
Isolation
Configuration
Configure TV VLAN with the following steps:
1. Define a TV VLAN by associating a Multicast group to a VLAN (using the
Multicast Group to VLAN
2. Specify the access ports in each Multicast VLAN (using the
VLAN Membership
Multicast Group to VLAN
To define the Multicast TV VLAN configuration:
Click VLAN Management > Access Port Multicast TV VLAN > Multicast Group to
VLAN.
The following fields are displayed:
• Multicast Group—IP address of the Multicast group.
• Multicast TV VLAN—VLAN to which the Multicast packets are assigned.
Click Add to associate a Multicast group to a VLAN. Any VLAN can be selected.
When a VLAN is selected, it becomes a Multicast TV VLAN.
Click Apply. Multicast TV VLAN settings are modified, and written to the Running
Configuration file.
Regular VLAN
VLAN can be used to
both send and receive
traffic (both Multicast and
Unicast).
Receivers of same
multicast stream are on
the same data VLAN and
can communicate with
each other
page).
page.
Multicast TV VLAN
Multicast VLAN can only be
used to receive traffic by the
stations on the port (only
Multicast).
Receivers of same multicast
stream are in different
Access VLANs and isolated
from each other
Port Multicast
12
260