Ports - Epson EB-5535U User Manual

Part Names and Functions

Ports

Name
A
For analog RGB signals from a computer and component
Computer port
video signals from other video sources.
B
For analog RGB signals from a computer and component
BNC port
video signals from other video sources.
C
Outputs to an external monitor the analog signal from the
Monitor Out port
computer connected to the Computer port or the BNC
port. You cannot output signals input from other ports or
component video signals.
D
Outputs audio from the currently projected image to an
Audio Out port
external speaker.
E
When controlling the projector from a computer, connect
RS-232C port
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s "ESC/VP21 Commands"
F
Cable holder Run a commercially available cable tie to secure cables.
Function
p.196
Name
G
Remote port Connects the optional remote control cable set and inputs
signals from the remote control. When the remote control
cable is plugged into the Remote port, the remote receiver
on the projector is disabled.
s "Optional Accessories"
H
Audio2 port Inputs audio from equipment connected to the BNC port.
I
Audio1 port Inputs audio from equipment connected to the Computer
port.
J
Use this for the batch setup function. This port is for
Service port
control use and should not normally be used.
s "Batch Setup"
K
Inputs video signals from HDMI compatible video
HDMI2 port
equipment and computers. This projector is compatible
L
HDMI1 port
with HDCP
M
Connects a LAN cable to the optional HDBaseT
HDBaseT port
Transmitter.
(EB-5535U/EB-5530U/
EB-5520W only)
s "Connecting an HDBaseT Transmitter
(EB-5535U/EB-5530U/EB-5520W only)"
s "Optional Accessories"
N
LAN port Connects a LAN cable to connect to a network.
Function
p.203
p.141
g
.
p.43
p.203
15