Adjusting Projected Images
Quick Corner
This allows you to correct each of the four corners of the projected image
independently.
a
Press the [Menu] button while projecting.
b
Select Geometry Correction from Settings.
c
Select Quick Corner, and then press the [
If the message "If this setting is changed, the image may be
distorted." is displayed, press the [
d
Use the [
], [
], [ ], and [ ] buttons to select the corner you
want to adjust, and then press the [
] button.
] button.
] button.
a
If the [Esc] button is pressed for approximately two seconds,
the confirm default reset screen is displayed.
Select Yes to reset the result of Quick Corner.
e
Use the [
], [
], [ ], and [ ] buttons to correct the position of
the corner.
When you press the [
] button, the screen shown in step 4 that
allows you to select the area to be corrected is displayed.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
57