Signal Menu - Epson EB-5535U User Manual

List of Functions
Submenu
Advanced You can make adjustments by choosing the following items.
Gamma: You can adjust the coloring by selecting one of the
gamma correction values, or referring to the projected
image or a gamma graph.
RGBCMY: You can adjust the hue, saturation, and
brightness of each color R (red), G (green), B (blue), C
(cyan), M (magenta), Y (yellow) individually.
Deinterlacing
progressive signals. (IP conversion)
Off is ideal for images with a large amount of movement,
Video for general video images, and Film/Auto for movie
films, computer graphics, and animation.
*2 Set to Normal or High Speed to adjust the iris to obtain
Auto Iris
the optimum light for images being projected. Select High
Speed to make faster iris corrections to match the speed of
the scene.
You can reset all adjustment values for the Image menu to
Reset
their default settings. See the following to return all menu
items to their default settings.
s "Reset Menu"
*1 This can be set only when the input signal is 480i, 576i, or 1080i.
*2 This can be set only if Color Mode is set to Dynamic or Cinema.
Function
*1 : You can convert interlace signals into
p.140

Signal Menu

Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
Submenu
Resolution (Only available when an analog RGB computer signal is being
input.)
Set to Auto to automatically identify the resolution of the input
signal. If images are not projected correctly when set to Auto, for
example if some of the image is missing, set to Wide for wide
screens, or set to Normal for 4:3 or 5:4 screens depending on the
connected computer.
Manual allows you to specify the resolution. This is ideal when
connected computer is fixed.
You can set the Aspect Ratio
Aspect
s "Changing the Aspect Ratio of the Projected Image "
119
Function
g
for projected images.
p.62