Wireless Network Projection; Selecting Wireless Network Settings Manually - Epson EB-5535U User Manual

Wireless Network Projection

You can send images to your projector through a wireless network.
To do this, you must install the Epson 802.11b/g/n wireless LAN module,
and then set up your projector and computer for wireless projection.
"Installing the Wireless LAN Unit"
s
You can connect the projector to your wireless network by configuring the
connection manually using the projector's Network menus.
Set the projector's time before configuring the Network menu. If the time is
not set, the wireless LAN may not be configured correctly.
"Setting the Time" p.33
s
After installing the wireless LAN module and setting up the projector,
install the network software from the Epson Projector Software CD-ROM
(if available) or download the software, as necessary. Use the following
software and documentation to set up and control wireless projection:
• EasyMP Multi PC Projection software allows you to hold interactive
meetings by projecting the computer screens of users over a network.
See the following for instructions.
EasyMP Multi PC Projection Operation Guide
s
• Epson iProjection app allows you to project from iOS or Android
devices.
• You can download Epson iProjection from App Store or Google play.
Any fees incurred when communicating with App Store or Google play
are the responsibility of the customer.
p.44

Selecting Wireless Network Settings Manually

Before you can project from your wireless network, you need to select
network settings for the projector.
a
Press the [Menu] button on the control panel or remote control.
b
Select the Network menu and press [Enter].
97