Epson EB-5535U User Manual page 120

List of Functions
Submenu
Tracking (Only available when an analog RGB computer signal is being
input.)
You can adjust computer images when vertical stripes appear in
the images.
Sync. (Only available when an analog RGB computer signal is being
input.)
You can adjust computer images when flickering, fuzziness, or
interference appear in the images.
Position You can adjust the display position up, down, left, and right when
a part of the image is missing so that the whole image is projected.
(Only available when an analog RGB computer signal is being
Auto Setup
input.)
Set to On to automatically adjust Tracking, Sync., and Position to
the optimum state when the input signal changes.
Changes the output image ratio (the range of the projected
Overscan
image). You can set the cropping range to 4% or 8%. When set to
Auto, this is automatically adjusted according to the input signal.
Blanking
You can hide images in the set area. Use the [ ][ ] buttons to
adjust the area. You can adjust by using a combination of Top,
Bottom, Left, and Right.
a
Function
Adjust Screen Type and Aspect before adjust‐
ing Blanking. Otherwise, Blanking may not
work correctly.
Submenu
Advanced You can set by choosing the following items.
Video Range: Select the video range for the input signal from the
HDMI1 port, HDMI2 port, or HDBaseT port. Set to Expanded if
you are concerned about misadjusted black levels or blown out
highlights in the image.
Input Signal: Select an input signal from the Computer port or
BNC port. If set to Auto, the input signal is set automatically
according to the connected equipment. If colors do not appear
correctly when set to Auto, select the appropriate signal
according to the connected equipment.
You can reset all adjustment values on the Signal menu to their
Reset
default settings, except for Input Signal.
See the following to return all menu items to their default
settings.
s "Reset Menu"
Function
p.140
120