Other Settings; Settings Related To Basic Operations; Settings Related To Display - Epson EB-5535U User Manual

Installing the Projector

Other Settings

Settings related to basic operations

Purpose
To start/stop projection by turning
on/off the main power or plugging
in or unplugging the power plug of
the projector.
To disable the automatic shutdown
function.
To disable buzzer beeps generated
when the projector is powered on/
off.
To operate the projector by
communication command even
when the power of the projector is
off.
To operate the projector by
communication command while
executing A/V Mute.
To turn off the power by pressing
the [t] button once.
Setting Methods
Set Direct Power On to On. (Default value: Off)
s Extended - Operation - Direct Power On
p.122
The projector can be powered off directly by the
breaker because it supports the direct shutdown
function.
Set Sleep Mode to Off. (Default value: On)
s Extended - Operation - Sleep Mode
Set A/V Mute Timer to Off.
s Extended - Operation - A/V Mute Settings -
A/V Mute Timer p.122
Set Beep to Off. (Default value: On)
s Extended - Operation - Advanced - Beep
p.122
Set Standby Mode to Communication On.
(Default value: Communication Off)
s Extended - Standby Mode p.122
Set A/V Mute Release to A/V Mute.
s Extended - Operation - A/V Mute Settings -
A/V Mute Release p.122
The default value is Any Button. If you operate
the projector while A/V Mute is on, A/V Mute is
released.
Set Standby Confirmation to Off. (Default value:
On)
s Extended - Display - Standby Confirmation
p.122

Settings related to display

Purpose
To change the menu position.
To prevent the display of menus,
messages, or warnings on the
screen.
p.122
To disable the display of the
message on the projection screen
when switching the source.
To register and save the settings of
the projected image.
Setting Methods
Change the settings of Menu Position.
s Extended - Display - Menu Position
Use User Button to set On-Screen Display to
User Button 1, User Button 2, or User Button
3.
s Settings - User Button p.121
When you press the button for which On-Screen
Display is assigned, menus or messages are not
displayed on the screen. When the same button is
pressed, they are displayed again. If On-Screen
Display is enabled, you cannot operate the
Configuration menu (except switching the color
mode and input source).
Set Messages to Off. (Default value: On)
s Extended - Display - Messages p.122
You can confirm warning by the display of the
indicator.
s "Reading the Indicators" p.151
Dialogs related to operations and behaviors, lamp
replacement notification, termination of Message
Broadcasting, and projector ID are displayed.
Set Memory.
s "Memory Function" p.82
35
p.122