Adjusting The Position Of The Projected Image (Lens Shift) - Epson EB-5535U User Manual

Installing the Projector
The following image adjustments can be made while the test pattern
is being displayed.
Top Menu Name
Image
Settings
Extended
*1 Except for custom settings of gamma
*2 Except for Color Uniformity
a
• To set menu items that cannot be set while the test pattern is
being displayed or to fine-tune the projected image, project an
image from the connected device.
• During image adjustment, press the [[][]] [Page] buttons on
the remote control to change the test pattern.
• You can also select a test pattern from the Configuration
menu.
s Settings - Test Pattern
c
Press the [Esc] button to close the test pattern.
Sub Menu/Items
Color Mode s p.60
White Balance
Advanced
*1
- Gamma p.66
s
- RGBCMY s p.65
Reset
Geometry Correction s p.55
*2
Multi-Projection p.72
s
p.121
Adjusting the Position of the Projected Image
(Lens Shift)
The lens can be shifted to adjust the position of the projected image, for
example, when the projector cannot be installed directly in front of the
screen.
The ranges within which the image can be moved are shown below.
EB-5535U/EB-5530U/EB-5520W
A
Center of lens
B
Projected image when the lens position is moved to the home
position
28