Operating A Projector From Your Computer - Epson EB-5535U User Manual

Monitoring and Controlling
a
• You can only enter single-byte alphanumeric characters and symbols.
• The following functions cannot be used while using Crestron
®
RoomView .
s "Changing Settings Using a Web Browser (Epson Web Control)"
p.190
Message Broadcasting (EasyMP Monitor plug-in)
• If you set Standby Mode to Communication On, you can control
the projector even if it is in standby mode (when the power is
off).
s Extended - Standby Mode

Operating a projector from your computer

Displaying the operation window
Check the following before carrying out any operations.
• Make sure the computer and projector are connected to the network.
• Set Crestron RoomView to On from the Network menu.
Network - Others - Crestron RoomView
s
a
Start the Web browser on the computer.
b
Enter the IP address of the projector in the address field of the
Web browser, and press the Enter key on the keyboard.
The operation window is displayed.
p.122
p.137
Using the operation window
A
You can perform the following operations when you click the buttons.
Button
Power Turns the projector power on or off.
Vol-/Vol+ Adjusts the volume.
A/V Mute Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)"
B
Switch to the image from the selected input source. To display input sources that
are not shown in Source List, click (a) or (b) to scroll up or down. The current
video signal input source is displayed in blue.
You can change the source name if necessary.
C
You can perform the following operations when you click the buttons. To display
buttons that are not shown in Source List, click (c) or (d) to scroll left or right.
Function
p.78
199