Info Menu (Display Only) - Epson EB-5535U User Manual

List of Functions

Info Menu (Display Only)

Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected.
Submenu
Projector Info Source
Input Signal
Resolution
Refresh Rate
Sync Info
Function
You can display the source name for the
connected equipment currently being
projected.
You can display the content of Input
Signal set in the Signal menu according to
the source.
You can display the resolution.
g
You can display the Refresh Rate
You can display the image signal
information.
This information may be needed if service
is required.
Submenu
Status
Serial Number
Event ID
HDBaseT Sig-
nal Level
(EB-5535U/EB-5
530U/
EB-5520W on-
ly)
Lamp Info Lamp Hours
Version Main
Screen Mirror-
ing
(EB-5535U/EB-5
530U/
EB-5520W on-
ly)
.
Function
This is information about errors that have
occurred on the projector.
This information may be needed if service
is required.
Displays the projector's serial number.
When problems occur when the projector
and computer are connected through the
network, information on the problem is
displayed using an Event ID. See the
following page for information on
interpreting the Event ID.
s "About Event ID" p.176
Displays the level for the image signal being
input from the HDBaseT port. When this is
displayed in yellow, the strength of the
signal level is reduced.
You can display the cumulative lamp
*
operating time .
When the lamp replacement time is
reached, the characters are displayed in
yellow.
Displays the projector's firmware version
information.
139