Projector Parts - Interface Ports - Epson EB-810E User Manual

Projector Parts and Functions
Name Function
Rear adjustable foot When setup on a surface such as a desk, extend the foot
G
to adjust the position of the image.
VESA mount fixing Use these points to attach the commercially available
H
points (four points) mount compatible with the VESA Mounting Interface
Standard (100 × 200 mm) when installing the projector
on a wall or suspending the projector from a ceiling.
Related Links
g
• "Air Filter and Vent Maintenance"
• "Installing a Security Cable"
p.134

Projector Parts - Interface Ports

Caution
Remove all feet when you install the projector
on a wall or suspend it from a ceiling.
p.232
Name Function
USB-A port (USB- Use to connect a USB memory device or digital camera
A
A1) for projecting movies or images using the PC Free
feature or in Content Playback mode.
Use to connect the optional document camera.
Use to connect a USB memory device to save error and
operation log files.
Use to connect the wireless LAN module.
USB-B port Use to connect a USB cable to the computer to project
B
computer images.
HDBaseT port Use to connect a LAN cable to the HDBaseT
C
Transmitter. You can use a network cable up to 100
(RJ-45)
m in length. To ensure proper data transmission, use
a Category 5e STP cable or better. However, operation
is not guaranteed for all input/output devices and
environments.
This port is compatible with HDCP2.3.
Check the following settings:
• To enable communication from the Ethernet and
serial ports on the transmitter, select On as the
Control Communications setting in the projector's
Signal I/O menu.
Signal I/O > HDBaseT > Control
s
Communications
• If you have connected an Extron XTP transmitter or
switcher, select On as the Extron XTP setting in the
projector's Signal I/O menu.
Signal I/O > HDBaseT > Extron XTP
s
18
In this guide, USB-A1 and USB-A2
ports are collectively referred to as
the USB-A port.