Epson EB-5535U User Manual page 123

List of Functions
Submenu
Display You can make settings related to the projector's display.
Menu Position: Select the position to display the menu on
the projected screen.
Message Position: Select the position to display the message
on the projected screen.
Messages: When set to Off, the following items will not be
displayed.
Item names when the Source, Color Mode, or Aspect is
changed, messages when no signal is being input, and
warnings such as High Temp Warning.
Display Background
to Black, Blue, or Logo when no image signal is available.
Startup Screen
projection starts.
*
A/V Mute
set to A/V Mute.) Select the background color for the
screen or the logo displayed when A/V mute is activated.
Standby Confirmation: (This is unavailable when the
Remote Control Type is set to Simple.) If it is set to Off,
you can turn off the power simply by pressing the [t]
button once.
Air Filter Notice: You can set whether or not (On/Off) to
enable Air Filter Notice. When this is set to On and a clog
in the air filter is detected, the message is displayed on the
screen.
Screen: (This setting is unavailable when projecting images
from a computer over a network.) Set the aspect ratio and
position of the projected screen according to the type of
screen being used.
s "Screen Settings"
Color Uniformity: Adjusts the color tone balance for the
whole screen.
s "Color Uniformity"
Function
* : You can set the screen background
*
: Set to On to display the User's Logo when
: (This cannot be set when A/V Mute Release is
p.25
p.187
Submenu
User's Logo * You can change the user's logo that is displayed as a
background during Display Background, A/V Mute, and so
on.
s "Saving a User's Logo"
Projection Select from one of the following projection methods
depending on how the projector is installed.
Front, Front/Ceiling, Rear, and Rear/Ceiling
You can change the setting as follows by pressing down
the [A/V Mute] button for about five seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
123
Function
p.80