List of Functions
Submenu
Crestron Room-
Set this to On only when monitoring or controlling the projector
View
over the network using Crestron RoomView
this to Off.
s "About Crestron RoomView
Changes in projector settings take effect upon restarting.
When this is set to On, the following functions are not available.
• Epson Web Control
• Message Broadcasting (EasyMP Monitor plugin)
Set to On if you want to enable the acquisition of the device
Control4 SDDP
information by Control4
g
(SDDP)
.
Message Broad-
You can switch the Message Broadcasting function to enable or
casting
disable.
You can download Message Broadcasting and its Operation
Guide from the following Web site.
http://www.epson.com
Reset menu
Resets all of the network settings.
Function
®
. Otherwise, set
®
"
p.198
®
Simple Device Discovery Protocol
Submenu
Reset network
To reset all of the Network settings, select Yes.
settings.
138
Function